W402ZF BOW HUNTER KIT - BACK ORDERED
This package includes one W402ZF With SPECIAL 55MM diameter bezel Light with 3-Mode interchangeable Green LED, Special Stabilizer insert mount, battery doubler extension, battery charger, and 2-Li-ion batteries, coiled cord On/Off switch, and hard-sided carry case.
The Wicked Lights W-402ZF is the ideal light for night time Predator & Hog hunting and it’s the best value in its class. Here’s why:
The W-402ZF basic design features:
- Purpose built and designed for night hunting.
- Precision machined T6 Aircraft grade aluminum with type III hard anodization.
- Designed, serviced, and warrantied in the USA.
- Our second generation hunting light with Scan & Kill® Technology.
- Featuring a unique Zoom / Focus design which allows you to focus and or defuse the light
- The W402ZF features a 3-mode brightness level capability STANDARD. No premium pricing to have the ability to change the light intensity from HIGH > MED > LOW.
- Combined with Zoom / Focus give you absolute control of light output and light intensity
depending on the situation and your night hunting style
- The W-402ZF comes in your choice of Green, Red, or White LED.
- Green LED - Ideal for hogs, general predator hunting (coyote, fox, bobcat)
- Red LED - Ideal for light shy predators (coyote, fox, bobcat)
- White LED - Ideal for law enforcement, general predator hunting, alligator, raccoon, other varmints, filming at night, general usage, when extra long range light is required
- The W-402ZF LED assembly is produced by an ISO9001 certified LED manufacturer for consistent color, reliability, and manufacturing quality.
- Operation temperature: Minus -30 ~ 120 degrees Fahrenheit
- O-ring sealed, water resistant
- LED with 50,000hr life
- The innovative combination of high magnification convex lens, specially designed LED circuit, and LED module that screws in to mount pad stop combine to eliminate the tedious and frustrating LED light focus adjustment procedure found in many of our competitors designs. No adjustment required - access and change the LED
in 20 seconds.
- Warranty: Limited three years on W402ZF light assembly. LED assembly three years. Battery, coiled cord tailcap, and charger one year. See manual for details and limitations
*Ambient light (moon phase), scope quality & power setting, LED color battery state of charge, background foliage, rain, snow, and size and color of target species will all affect range
Manufacturer specifications are subject to change without notice.
Notes Regarding Light Measurement
Why No ANSI Lumen Measurement or
listing? The Lumen measurement means very little when it comes to hunting lights. Lumens rating is NOT an indicator of light range or how far a light will shine. A 250 Lumen LED can have significantly longer range as compared to a light with 1,100 Lumen LED. It's all dependent on the light bezel, reflector, and lens design, that's where you achieve beam distance and long
So How Do You Measure Light Distance or Range? Candela (Peak Beam Intensity) is the measurement unit and light intensity is measured in candela (cd) at the brightest part of the beam.
A lux reading in the brightest portion of the beam is taken at some distance. For example this measurement can be accomplished at 2 meters or 5 meters or a
further distance to ensure the beam is fully focused. This is very important on lights using convex lenses since they often don't reach peak intensity until several meters forward of the bezel. With the light on its brightest mode and tightest focus at some time between 30 and 120 seconds of turning the light on. The lux reading is multiplied by the square of the distance in meters to get
candela. Regardless of the distance at which the reading is taken, you should end up with the same value in candela, therefore the measurement is independent of distance. A lux reading taken at 1 meter distance is the same as candela (since 1 squared is 1).
What's the FL-1 Standard? The short version is the American National Standards Institute (ANSI) approved a new specification standardizing flashlight performance. The purpose of the standard is to allow consumers to make apples-to-apples comparisons of lights and to eliminate exaggerated light performance by quoting "emitter lumens" or "out-the-front lumens". The test can be performed by the manufacturer or an independent lab.
Is the FL-1 Standard A Good Standard For Hunting Lights? It's good to have industry standards as it relates to measurements, however the formula for calculating Beam Distance is based on a .25 lux standard (considered by some as the same as the amount of ambient light on a clear full moon). We feel the .25 lux calculation used in the formula to express Beam Distance leads to confusion when using the Beam Distance rating to determine if a hunting light will meet your requirements for night hunting. For an example, a light advertising a 217 yard Beam Distance as per the FL-1 calculation in reality will not provide enough illumination to positively identify a target hog or coyote at that distance even with high quality optics.
Our experience is your Useful Beam Distance will be closer to 140 yards. Because of this, Wicked Hunting Lights has developed another measurement called Useful Beam Distance.
What is Useful Beam Distance? We have modified the FL-1 Beam Distance formula and replaced the .25 lux calculation with a more stringent .60 lux. We call the resulting calculation Useful Beam Distance. Useful Beam Distance is a more accurate reflection of a lights range in yards and suitability for use as a hunting light. Remember ambient light (moon phase), scope quality & power setting, LED color, battery state of charge, background foliage, humidity, rain, snow, and size and color of target species will all affect the useful beam
distance and light hunting range.